i have jugs with sleeves, they need work. who wants them?

nuklearzelph

i found an engine. it was frozen, but i crossed my fingers and bought it. cylinders frozen like i hoped. (crank from the sump hole looks good and cam is fine too.) here comes the 750kit. Laughing

anyway the exhaust valve on the right cylinder was stuck open and it has been sitting for a long time. so there is rust chunks on the sleeve wall in that one. both sides had 1/4 inch of crud covering everything. currently hoping that the little bit of seafoam i have in them will help loosen the pistons. the crud is pretty well cleaned out.

the fins look good and there is no broken fins or obvious signs of problems. this is a 79 engine. the left might be ok if you wanted to hone it, but i duno if you could get away with it on the right side. maybe bore? new sleeve should take care of it anyway. i'm guessing they are stock bore.

if someone wants the jugs, i'll send them for the price of shipping. don't know if the pistons will be ok when i am done, but you can have them too if you want.

nj1639

Sent pm

What Happened to 650rider.com?

Yamaha xs650