Search 650Rider.com and XS650.com using Google!
|
| |
|
|
xs650 > > After Market Products > > Pamco - Electronic Ignitions > > PAMCO Service Bulletin |
---|
Author |
Message |
pamcopete 650Rider Supporter
Joined: Oct 10, 2008 Posts: 875 Location: South Carolina
|
Posted: August 22, 2009, 4:13 pm Post subject: PAMCO Service Bulletin |
|
All users of the PAMCO ignition system:
There have been a few recent reports of the mounting screw for the PC board coming loose. The screw will not exit the board because the rotor comes in contacts with it, but the screw should be checked, tightened and locked with Permatex Threadlocker "Blue" or LocTite "Blue".
Procedure:
1. Remove the rotor.
2. Remove the hold down screws for the plate.
3. Remove the plate. (It is not necessary to disconnect the wires)
4. Loosen but do not remove the screw.
5. Drip a drop of the "Blue" threadlocker in the screw hole on the back of the plate.
6. Tighten the screw.
7. Wipe any excess threadlocker from the plate.
8. Reinstall the plate.
9. Reinstall the rotor.
10. Retime the engine.
_________________ Ride.Enjoy.Life is simple
Last edited by pamcopete on August 27, 2009, 8:52 am; edited 1 time in total |
|
Back to top |
|
|
IAmGrowler Full Member
Joined: May 04, 2009 Posts: 97 Location: Seattle, WA
|
Posted: August 23, 2009, 2:17 pm Post subject: Re: PAMCO Service Bulletin |
|
I did it when it was installed.
I also tossed the original hardware and replaced it with stainless allen screws.
_________________ The Voices In My Head Tell Me Things -- Bad Things. |
|
Back to top |
|
|
pamcopete 650Rider Supporter
Joined: Oct 10, 2008 Posts: 875 Location: South Carolina
|
Posted: August 23, 2009, 2:31 pm Post subject: Re: PAMCO Service Bulletin |
|
IAmGrowler,
Do you mean the hold down screws for the plate?
aybe those voices aren't so bad after all!
_________________ Ride.Enjoy.Life is simple |
|
Back to top |
|
|
pumps 650Rider Supporter
Joined: May 29, 2007 Posts: 1993 Location: Kansas City, Missouri, U.S.A.- 1977 XS650 "D" Standard
|
Posted: August 23, 2009, 10:56 pm Post subject: Re: PAMCO Service Bulletin |
|
I also replaced the plate mounting screws with allen heads. I'll check mine.
_________________ You don't HAVE to be crazy to run into burning buildings, but it HELPS!
On an XS you won't pass yourself on the road everyday.
My Bikes |
|
Back to top |
|
|
pamcopete 650Rider Supporter
Joined: Oct 10, 2008 Posts: 875 Location: South Carolina
|
Posted: August 24, 2009, 4:11 pm Post subject: Re: PAMCO Service Bulletin |
|
Check your PAMCO for this bulletin...
_________________ Ride.Enjoy.Life is simple |
|
Back to top |
|
|
IAmGrowler Full Member
Joined: May 04, 2009 Posts: 97 Location: Seattle, WA
|
Posted: August 27, 2009, 8:46 am Post subject: Re: PAMCO Service Bulletin |
|
pamcopete wrote: |
IAmGrowler,
Do you mean the hold down screws for the plate?
|
All of the hardware.
_________________ The Voices In My Head Tell Me Things -- Bad Things. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|
|
|
|
Check out the new Honda CB750 Forum at CB750.com! A site dedicated to the great Honda SOHC and DOHC CB750.
Check out the new Yamaha XS400 Forum at XS400.com!
Yamaha xs650
xs650, xs, 650, forum, links, chopper, custom, yamaha, parts, forum, info,
information, bb, bulletin board, XS650 650Rider, Free Unrestricted xs650
forum, Personal photo albums, Post images in Forum, News columns, Daily blog,
Links, Event calendar, Information for Yamaha XS650
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
|
|