Author |
Message |
Topic: Mikes xs performance pipes and new megaphone mufflers |
jralex
Replies: 21
Views: 18387
|
Forum: Exhaust Posted: August 12, 2009, 9:02 pm Subject: Re: Mikes xs performance pipes and new megaphone mufflers |
Dave, thanks for the video. It is hard to tell if they would be any quieter than my existing EMGO's w/ wrapped straight through baffle or not.
Mike did send me dimensions for the baffles. They are: ... |
Topic: Mikes xs performance pipes and new megaphone mufflers |
jralex
Replies: 21
Views: 18387
|
Forum: Exhaust Posted: August 6, 2009, 12:27 pm Subject: Re: Mikes xs performance pipes and new megaphone mufflers |
Dave, any progress on audio?
Also, if willing, sometime when you have a baffle out , if you could measure the od of the baffle inlet, the od of the plate at the rear that the outlet pipes mount ... |
Topic: Taller Shocks |
jralex
Replies: 17
Views: 8175
|
Forum: Front / Rear Ends and Shocks Posted: July 31, 2009, 1:40 pm Subject: Re: Taller Shocks |
No pic's of them on the bike. |
Topic: Taller Shocks |
jralex
Replies: 17
Views: 8175
|
Forum: Front / Rear Ends and Shocks Posted: July 23, 2009, 9:07 am Subject: Re: Taller Shocks |
MN, here are a few pictures of the shocks
[img]http://i166.photobucket.com/albums/u92/cfvq/XS/RW%20shocks/IMG_2828.jpg[/img]
[img]http://i166.photobucket.com/albums/u92/cfvq/XS/RW%20shocks/IMG_2 ... |
Topic: Taller Shocks |
jralex
Replies: 17
Views: 8175
|
Forum: Front / Rear Ends and Shocks Posted: July 23, 2009, 7:11 am Subject: Re: Taller Shocks |
Jack, See my tra-fe post in the cafe or tracker section for different angle pictures.
MN, I would like $60 for the shocks + whatever postage to get to you is. they are 13-3/8" long, eye to eye. For ... |
Topic: Taller Shocks |
jralex
Replies: 17
Views: 8175
|
Forum: Front / Rear Ends and Shocks Posted: July 22, 2009, 10:09 am Subject: Re: Taller Shocks |
I have a longer set of Red Wings that I ran without any problems. I would sell if you have interest pm me and I can get you some pictures, eye to eye length and a price. They are chrome body and sprin ... |
Topic: My 78 tra-fe project |
jralex
Replies: 6
Views: 5512
|
Forum: Cafe Racer Posted: July 22, 2009, 9:50 am Subject: Re: My 78 tra-fe project |
The cafe seat comes from Mikes XS. The seat is made to work with the stock XS650 tank, and does so pretty well. I had to hog out the holed in the hinge that mounts to the seat to allow a bit of adjust ... |
Topic: Mikes xs performance pipes and new megaphone mufflers |
jralex
Replies: 21
Views: 18387
|
Forum: Exhaust Posted: July 16, 2009, 11:56 am Subject: Re: Mikes xs performance pipes and new megaphone mufflers |
Dave, are the mufflers his new mechanical baffle design, as opposed to the old standard perforated baffle wrapped in fiberglass?
The reason I ask is that I have EMGO's with to standard fiberglass w ... |
Topic: Tra-fe |
jralex
Replies: 0
Views: 2906
|
Forum: Flattracker - Streettracker Posted: July 16, 2009, 11:49 am Subject: Tra-fe |
Working on a project that started out as a 78 standard. Like the tracker look and the cafe so my project will interchange tank/seat combo for both looks on the same bike.
Posted original on cafe su ... |
Topic: My 78 tra-fe project |
jralex
Replies: 6
Views: 5512
|
Forum: Cafe Racer Posted: July 16, 2009, 9:11 am Subject: Re: My 78 tra-fe project |
Thanks boys,
Pumps, its coming along. It is a fun old bike to work on. Can't seem the time to dedicate good long blocks of time to. That balance thing ya know.
Cretin, I will be able to have bot ... |
Topic: My 78 tra-fe project |
jralex
Replies: 6
Views: 5512
|
Forum: Cafe Racer Posted: July 15, 2009, 11:04 pm Subject: My 78 tra-fe project |
Some pictures of my tracker/cafe project. Purchased the bike in the spring last year.
Have redone the wheels, new tires, cleaned carbs and increased main and pilot jets, new front brake set up fro ... |
Topic: Building a Scrambler/Dual sport (56k beware) |
jralex
Replies: 33
Views: 33717
|
Forum: Flattracker - Streettracker Posted: July 15, 2009, 1:01 pm Subject: Re: Building a Scrambler got questions |
Welcome to the XS world.
Headpipes look a bit different than mikesxs.net. The ones in the picture seem to have more of a kick up at the rear. Mike's has some similar. The mufflers in the picture lo ... |
Topic: XS750 tank fer sale.. |
jralex
Replies: 12
Views: 6621
|
Forum: Cafe Racer Posted: May 20, 2009, 1:09 pm Subject: Re: XS750 tank fer sale.. |
Lee, SLOWLY working on a project where I will have a 750 tank and Mike's seat for a cafe look and be able to change to the stock tank and a tracker seat for a tracker look.
I drilled the spot weld ... |
Topic: Wanted 18" rear rim |
jralex
Replies: 2
Views: 1247
|
Forum: Stock Parts Posted: May 12, 2009, 1:26 pm Subject: Re: Wanted 18" rear rim |
I have an 18" rear and a 19" front from a 78 standard. These are the alloy flanged type. No spokes or hubs, just the hoops. They are straight without any dents or gouges. They do have some corrosion t ... |
Topic: Quantity & type fork oil w/emulators |
jralex
Replies: 16
Views: 6162
|
Forum: Frames Posted: March 10, 2009, 1:39 pm Subject: Re: Quantity & type fork oil w/emulators |
I have installed emulators on my XR. They work relatively well. As XS & tom indicated, they make the old style damper rod type for work more like a cartridge fork. Sharp edged bumps are less of a jolt ... |
Topic: A new tracker is born... |
jralex
Replies: 23
Views: 15024
|
Forum: Flattracker - Streettracker Posted: March 10, 2009, 1:22 pm Subject: Re: A new tracker is born... |
Very nice work indeed!
I have always liked this style pipe too. Where did you get the reverse cone meg's? Are overall lengths for each exhaust bank pretty close?
I am in the process (slow) of a ... |
Topic: Fork rebuild - internal bush replacement |
jralex
Replies: 8
Views: 6776
|
Forum: The Vault Posted: February 25, 2009, 7:19 pm Subject: Re: Fork rebuild - internal bush replacement |
I am rebuilding too. Racetech does not have these bushings. Can you give me any contact on where you found these. |
Topic: Fork rebuild - internal bush replacement |
jralex
Replies: 8
Views: 6776
|
Forum: The Vault Posted: February 24, 2009, 4:33 pm Subject: Re: Fork rebuild - internal bush replacement |
Striker, If you haven't re-assembled yet, they don't show a replacement bushing on their website, but have you tried calling Racetech? 951.279.6655 |
Topic: Quantity & type fork oil w/emulators |
jralex
Replies: 16
Views: 6162
|
Forum: Frames Posted: February 24, 2009, 4:28 pm Subject: Re: Quantity & type fork oil w/emulators |
WOW! youda thunk I have some kinda disease or something the way everyone has avoided me.
Gonna try 15 w. |
Topic: Quantity & type fork oil w/emulators |
jralex
Replies: 16
Views: 6162
|
Forum: Frames Posted: January 27, 2009, 7:07 pm Subject: Quantity & type fork oil w/emulators |
I am in the process of rebuilding my forks. I will have Mike's emulators and Mike's progressive springs. I am about 190#. I like a sport bike type ride, without it being bone jarringly stiff.
Wonde ... |
Topic: ignition options |
jralex
Replies: 6
Views: 1475
|
Forum: I'm just saying... you know Posted: December 17, 2008, 12:38 am Subject: Re: ignition options |
Thanks for the input guys.
JD, I must be wrong about the adjustable rev limiter on the Boyer micro digital ignition. That is why i'm posting on this. Do you know what the rev limit is? Other than t ... |
Topic: ignition options |
jralex
Replies: 6
Views: 1475
|
Forum: I'm just saying... you know Posted: December 12, 2008, 3:08 pm Subject: ignition options |
I am considering a new ignition system for my 78 standard tracker/cafe project. My goals are to get rid of the points and improve performance and spark.
I have some pros and cons for each system a ... |
Topic: RR Build Underway |
jralex
Replies: 45
Views: 36438
|
Forum: Cafe Racer Posted: November 26, 2008, 3:16 am Subject: Re: RR Build Underway |
Dwyatt, thanks for the info. Keep us updated on the project! |
Topic: Clubman or drag? |
jralex
Replies: 34
Views: 19782
|
Forum: Cafe Racer Posted: November 19, 2008, 5:56 pm Subject: Re: Clubman or drag? |
IMO you mock up idea sounds like the ticket. If you don't want the bike out of commission, I would suggest waiting on removing the grips until after you are pretty sure everything will work.
Good L ... |
|