Author |
Message |
Topic: clutch |
smearny
Replies: 10
Views: 7934
|
Forum: Drive Posted: November 21, 2009, 3:26 am Subject: Re: clutch |
yes they are.everything like the manual asks.it ligns up and it's two fiber backed plates then 2 aluminum based plates, again 2 fiber.
if i don't screw the clutch springs too tight,it works,but as so ... |
Topic: clutch |
smearny
Replies: 10
Views: 7934
|
Forum: Drive Posted: November 20, 2009, 4:04 pm Subject: Re: clutch |
sorry.i did it all.cable is lubed worm is lubed,the 2 little balls are in place.
when i pull the clutch i can see the plates assembly coming out,disengaging the clutch,but as soon as i tighten the cl ... |
Topic: clutch |
smearny
Replies: 10
Views: 7934
|
Forum: Drive Posted: November 17, 2009, 3:14 pm Subject: clutch |
okay,i torque the clutchsprings into the basket,not too tight,everything fine,when i pull the clutch,the pushrod from the other side,pushes the clutch plate,like it should.when i tighten the springs f ... |
Topic: clutch |
smearny
Replies: 4
Views: 2725
|
Forum: Engine Posted: November 11, 2009, 1:51 am Subject: clutch |
my clutch is not engaging.i changed the plates,and i tried all the adjustments. |
Topic: clutch plates |
smearny
Replies: 3
Views: 2405
|
Forum: Engine Posted: November 3, 2009, 8:59 pm Subject: Re: clutch plates |
in this drawing.it's 6 steelplates.why does mike says it's 5?! |
Topic: clutch plates |
smearny
Replies: 3
Views: 2405
|
Forum: Engine Posted: November 3, 2009, 8:25 pm Subject: clutch plates |
okay mikesxs says,it's 5 steelplates,and 6 friction,for after 80' models.since the first plate is steel to put closest to the inner hub,there's gonna be 2 friction on each other without one steel betw ... |
Topic: idle erratic |
smearny
Replies: 3
Views: 2505
|
Forum: Engine Posted: October 30, 2009, 12:46 am Subject: Re: idle erratic |
it doesn't sputter or hang.i wonder if it's the carb adjust or something else .somebody?! |
Topic: idle erratic |
smearny
Replies: 3
Views: 2505
|
Forum: Engine Posted: October 29, 2009, 2:36 pm Subject: idle erratic |
my idle is not 100% stable.i didn't synchronise the carbs yet.is that the reason?! |
Topic: clutch |
smearny
Replies: 6
Views: 3240
|
Forum: Engine Posted: October 29, 2009, 12:18 pm Subject: Re: clutch |
thank you!you guys are the bomb!
freakin' manual doesn't say anything about this!what the hell. |
Topic: clutch |
smearny
Replies: 6
Views: 3240
|
Forum: Engine Posted: October 29, 2009, 12:33 am Subject: Re: clutch |
what you mean by"pressure plates not lined up correctly..?! |
Topic: clutch |
smearny
Replies: 6
Views: 3240
|
Forum: Engine Posted: October 29, 2009, 12:31 am Subject: Re: clutch |
okay,the manual says"..two friction plates with fiber backing follow 2 friction plates with aluminium backing..."i didn't pay attention to that.and i have only 5 cushion rings instead of 6.is that a p ... |
Topic: clutch |
smearny
Replies: 6
Views: 3240
|
Forum: Engine Posted: October 28, 2009, 3:42 pm Subject: clutch |
how can i check if the clutch is working?!i just changed the plates,cuz won't work,-i did something wrong.i get nasty noises from the right engine cover,something noisy and spinning,and the clutch sti ... |
Topic: rpm going up with out doing anything |
smearny
Replies: 2
Views: 2261
|
Forum: Engine Posted: October 20, 2009, 11:06 pm Subject: rpm going up with out doing anything |
i wonder if it has something to do,with the exhaust,they don't fit 100% into the head blow some air |
Topic: clutch not disengaging |
smearny
Replies: 0
Views: 1454
|
Forum: Engine Posted: October 20, 2009, 11:04 pm Subject: clutch not disengaging |
i checked the clutchplates,they are fine. |
Topic: clutch adjustment |
smearny
Replies: 5
Views: 2894
|
Forum: Engine Posted: October 19, 2009, 11:44 pm Subject: Re: clutch adjustment |
so it's two,right?!one between the puhrods,and one in the lever..?! |
Topic: clutch adjustment |
smearny
Replies: 5
Views: 2894
|
Forum: Engine Posted: October 19, 2009, 11:43 am Subject: Re: clutch adjustment |
i had both off.the right side(when sitting on bike)has a ball,does the left side have one?! |
Topic: clutch adjustment |
smearny
Replies: 5
Views: 2894
|
Forum: Engine Posted: October 19, 2009, 1:19 am Subject: clutch adjustment |
the little screw is all the way in.i can't put the nut on,it falls off.i was adjusting back and forth till i figured out,the clutch plates were stuck.now i can't find bottom with that little screw,it ... |
Topic: fire out of exhaust |
smearny
Replies: 0
Views: 1743
|
Forum: Engine Posted: October 19, 2009, 1:14 am Subject: fire out of exhaust |
..the rpm is going up and down,without doing anything.is the timing maybe off?! |
Topic: engaging 1st gear,motor dies |
smearny
Replies: 4
Views: 2977
|
Forum: Engine Posted: October 10, 2009, 10:24 pm Subject: Re: engaging 1st gear,motor dies |
wait a minute.i put an 83 motor into a 72,i kept the 72 points ignition system..do i have a sidestand switch,now?! |
Topic: engaging 1st gear,motor dies |
smearny
Replies: 4
Views: 2977
|
Forum: Engine Posted: October 10, 2009, 7:59 pm Subject: engaging 1st gear,motor dies |
just put a "new" old motor.as soon i engage the 1st,it dies.so i guess the clutch is not seperating..?! |
Topic: 1971xs 650, full engine swap |
smearny
Replies: 3
Views: 2378
|
Forum: Engine Posted: October 10, 2009, 7:57 pm Subject: Re: 1971xs 650, full engine swap |
no problems.i put an '83 into my '72.all mountings are the same. |
Topic: megaphones on '83 engine,blowing air |
smearny
Replies: 5
Views: 4266
|
Forum: Exhaust Posted: September 26, 2009, 7:44 pm Subject: Re: megaphones on '83 engine,blowing air |
i dont know if they are original,the rings seem to be.
i changed the angle of putting the pipe inside,let's see if works |
Topic: idling,suddenly dies |
smearny
Replies: 1
Views: 1588
|
Forum: Electrical Posted: September 22, 2009, 2:06 pm Subject: idling,suddenly dies |
i think for a moment,i get no spark or weak spark.must be something in the charging system.it doesn't really die,but wants to |
Topic: idling,suddenly dies |
smearny
Replies: 11
Views: 4118
|
Forum: Engine Posted: September 22, 2009, 2:01 pm Subject: Re: idling,suddenly dies |
yeah something tells me it's the circuit.it must be somewhere,in the charging system,i guess the circuit breaks down for a moment.weak,or no spark.
who is good with electricity?!
maybe we should go ... |
|