Search found 49 matches

is there any difference between the drum cover on a spoke wheel as compared to the mag wheel for an 81 xs? they both have it300 stamped on the inside of them and appear to fit ok. I am just wondering ...

what about chamfering the holes does it make a difference, just enough to break the edge it just seems so sharp when you drill it out. i don't want to be blowing through pads.

any body drilled one before what and how do i go about doing it. is there any thing i need to pay close attention to? other than having the holes spaced right for weight and to keep it in balance. tha ...

that is what i am looking into now yamaman i may have jumped the gun. the clutch cable is froze, it was pulled in and now is stuck and engaged, i will be pulling it tomorrow and seeing what happens.

good looking that info is sweet i saved the page already thanks for the info.

I may have put this in the wrong place first so I am trying here. just picked up another xs650 need it like i need a hole in my head but could not turn it down 1980 with 11,000 miles off the road sinc ...

just picked up another xs650 need it like i need a hole in my head but could not turn it down 1980 with 11,000 miles off the road since 1991 for $80.00 so it was one i could not let go by. PROBLEM is ...

any body using the SM Mark II Rear Tire by Avon it is size 16" 5.00s tire looks cool any thoughts? I also like the look of the shinko 240 classic and think that might be a little more squared than the ...

hello building a xs bobber right now it is a 1981 xs650 that I hard tailed motor has 20,000 on it and leaks like a sinking boat, but runs like a top starts on the first kick every time and will run al ...

very nice, mine should be done by spring

That is what I was afraid of the shinko price is right and I want the white wall up front also, so I guess the money I save on the rear is going into the front. thank yous

what would be a good match for the shinko Classic 240 Whitewall on the rear I am looking for something in a white wall for the front also that will match the tread pattern, I don't want a newer lookin ...

any one, any one? pics? anything?

I have been looking at the G&L Choppers rear brake conector it costs $75 dollars and looks to be bout $2 dollars for the stuff to make it yourself> any body here make one on their own?

what is everyone using? should I weld it on or does the axle one mount up pretty solid with out drifting up and down?

Thank you it is nice having another brain to help out, I was so upset about the vent I never looked at the obvious. It is vent to the cap no need to any thing else Thank you jayel

it is made by AMERICANCLASSICMOTORS it is a new tank, it is smaller size 2.25 gal. where would I run the vent tube? I am guessing out and up the front of the tank by the bars

I just bought a pop up gas tank off ebay. it is a left side petcock but, up front on the right side there is another nipple. what is this for, is it a vent, do I need it or can I just weld it shut?

perfect, thanks

looking for a place that sells smaller side mounted head lights like the stock one only smaller, like 4.5" or 5". do they even make them? or will i have to go with a bottom mount? thank you

what do you guys think about redoing the 650 motor into a 750? any problems, how reliable would it be and would it be worth it. my head gasgets leak alittle from the bike sitting for so long so i fig ...

Hi I am putting a set of minie apes on my bobber. 12" rise what size brake hose, clutch cable, and throttle cable will I need to move up to. right now there is all stock on there. thank you

my bike is bobbed out and every thing that can be cut is already cut. i am just looking for the cheapest way possible to do this. if i can do it my self i would rather that than buying one already mad ...

looking to maybe stretching out my swing arm 4" how much work is involved? and what do i have to do? thankyou

What Happened to 650rider.com?

Yamaha xs650